Always make sure you are up-to-date about your HVAC unit. Take a look at the system or the owner’s manual to find the name and model number. This information will be helpful to any contractor you hire to repair it.
The subject of HVAC systems might strike you as complex when you hear people discussing it. This is because there is a lot that goes into this kind of thing. The more you learn about it, the simpler it will be to comprehend the information.
It is important to have some knowledge of your present system and needs before calling a contractor. It will be difficult for an HVAC contractor to provide you with an estimate on the phone without knowing what your current setup is. Being unable to explain what has been already done will make it even harder. This is information that you should have prepared in advance.
Be aware of the type of system that is installed in your home prior to calling a contractor to fix it. Know the brand name and model number. It is also helpful to have the maintenance history. This will facilitate the process when your contractor asks for this information.
To make sure your condenser fan works properly, keep the fan blades and the coils clean. Prior to working on or cleaning the unit, be sure to turn off the power. Also, make sure you remove any debris or leaves from the condenser unit outside.
When spring rolls around, give the condenser fan blades and coils a good clean. For safety, always turn the power off first. Secondly, pop the grill off, take the blades off and clean them as well as the actual unit.
Be sure to clean the fan blades and coils of the condenser fan. Before you get started, cut the power. Then, take the grill off, pull the blades out, and gently clean them as well as the unit itself.
Don’t get grass clippings on your outside unit. When you work with your lawn mower, make sure it spits the grass to the side opposite of your unit. Also do this when blowing leaves or shoveling snow.
When choosing the area for placing an outdoor compressor device, place it in a shady area. The cooler air that the unit can suck in, the less work it will need to do to further cool the air.
If you have oil ports as part of the fan condenser, annual lubrication is key. You’ll find these ports are covered with a metal or rubber cap. Use a lightweight oil and do not overfill them.
Put outdoor condensers in the shade. It will help you save on your energy bill when you do this.
Make sure your HVAC unit is in the shade. The air in the shade is cooler and can help save on energy costs.
When it gets cold outside, turn off the outdoor condensers. If the temperature outside is less than 60ºF, be sure to turn off the unit so that you don’t damage it. This will ensure your system works well each year, which could save you quite a bit in repair costs.
Be sure to have twice annual HVAC system checks. The best times to have the system checked is spring and fall, so you are sure everything is running at peak performance before the heating and cooling seasons. Regular inspection will help you avoid unexpected repairs.
If you can, install double-paned windows throughout your home. Having double pane windows allows your air conditioning unit to be run much less during the summer, because the cool air is kept inside the home. Likewise, in the winter more hot air stays inside during the cold season.
After reading this article, you should be somewhat familiar with the HVAC unit. You can start getting the most out of your unit by choosing to follow the great advice outlined in this article. You will be glad when you get it!
In order to keep energy costs down, make sure heating and cooling systems are services at least once per year. During a maintenance visit, professionals can help by inspecting the system’s motor, oil the different moving parts as well as check the system’s freon levels. This ensures your system runs smoothly.
https://www.greenleafair.com/product-category/trane-systems/
–
–
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/