Check the whole house before you call for help. Figure out which rooms are too cool or warm. This will help your contractor quickly determine where the issue lies and how to get it fixed quickly and easily.
If you’re in the market for an HVAC system, the available options may be overwhelming. How are you to know what kind of system to purchase? How big? Which features are the best? It can overwhelming to shop since so many new features are coming out each day. Here are some great suggestions to help you purchase and maintain an HVAC system.
Each spring it’s time to clean the inside of your condenser unit, including the fan and the sensitive coil. Don’t forget to disconnect the power first. Then, pop off its grills, pull the blades out, and begin cleaning the unit and them gently.
It is important to have some knowledge of your present system and needs before calling a contractor. It will be difficult for an HVAC contractor to provide you with an estimate on the phone without knowing what your current setup is. If you can’t explain anything to them, this will be even more difficult. So, know this information in advance.
Make sure that you do not cover your outdoor components with grass clippings when you are trimming the grass. Make sure the grass does not get in your unit. The same goes for blowing leaves, so always be careful if you are moving debris near your HVAC devices.
If your unit is outdoors, clean them regularly. Things pile up after storms and damage your system. It may begin to overheat, causing massive damage.
The HVAC unit in your home can become damaged from falling leaves. Make sure the unit’s fan grill is cleaned frequently when the leaves begin to fall. The fan must be unobstructed to work properly, and if it becomes blocked, it could cause your system to break down.
Clean your condenser’s fan blades and coil in the spring. Make sure to turn off the fan’s power first to be safe. Remove the grill and carefully clean the blades and surrounding areas.
Some fan condensers may contain oil parts, and if yours does, ensure it is lubricated at least once per year. You’ll find these ports are covered with a metal or rubber cap. Use SAE 20 oil that is non-detergent and lightweight, and put 10 drops or fewer in each port, but make sure to avoid overfilling them.
If your condenser comes with oil ports, you should lubricate it yearly. They generally have a rubber or metal cap on them. Put about ten drops or less of a good non-detergent SAE 20 oil into each port.
You can boost the efficiency of your HVAC unit by replacing it with a new energy efficient one or moving your old one to a shady outside location. As it brings in cool air to cool, you will save a lot of money.
If you want to know where you should put an outdoor compressor, you should place it somewhere where there is a lot of shade. When the unit sucks in cooler air, then less work is required to cool it further which in turn boosts the units efficiency.
One great way to save some cash when you’re working on keeping a home cool is to install a thermostat that’s programmable. These convenient thermostats may shave ten percent or more off of your bills, because they significantly cut energy use when you’re not around. Also, you’ll find that you can program your thermostat from a computer or anything connected to the web.
You may feel intimidated by the options available when shopping for an HVAC. Using the advice from our experts will make the decision easier. Review and apply all of the tips you have just learned.
Keep energy costs from rising by having your system serviced annually. The service will include motor inspection, oiling of moving parts, and a freon level check. These simple things will keep your system running at peak performance.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/