Before you contact people to assist you in getting your system fixed, know what kind of system you’re working with in the first place. Get the brand, model name, and if you can you should get the maintenance history out. This will ensure that you can give your new contractor all the information they need.
It can be hard to understand HVAC, but it can be easier with some helpful information. If HVAC units interest you, then you should continue reading the article because you’ll find plenty of useful information. Check out the following article.
Before contacting a repair service, do a short tour of the entire home. Find out which rooms are hot and which are cold. This can help the contractor determine the problem areas quickly and fix the problem easily.
If you struggle with your HVAC, try touring your home before calling a professional. Find out which rooms are hot and which are cold. You can then relay this information to the technician so that they can more easily figure out what the problem is.
Make certain that you clean your condenser when the weather begins to warm. For safety, always turn the power off first. Then remove the grill, remove the blades and clean it from top to bottom gently.
Clean the fan blades and coils prior to summertime. Before you clean the unit, be sure to turn off the power. Leaves and debris can build up inside the unit and cause damage.
You must keep your HVAC systems oil ports lubricated annually. They generally have a rubber or metal cap on them. Put 10 drops of lightweight, non-detergent SAE oil in each port. Be careful not to use too much.
Make sure clippings don’t get on your outdoor units when your mowing your lawn. Aim your grass cuttings in a direction away from your unit. This also applies to blowing leaves or moving debris. Just be careful with that exterior HVAC unit.
Make certain that an outdoor unit is in the shade. The cooler air entering the unit will require less work to get to the proper temperature.
If the fan on your condenser includes oil ports, they must be lubricated annually. You can find these ports covered with rubber or metal caps. Choose an oil graded SAE 20, it is non-detergent and lightweight. Place about 10 drops into each of the ports, taking care that it does not overfill.
Boost energy efficiency by putting your condenser unit in the shade. Your air conditioner won’t have to work so hard if the air is sucks in is already cool.
Put outdoor units in the shade if you are installing them. This will ensure cool air is sucked in, meaning less cooling must be done by the unit.
Equipping your home with a programmable thermostat can be an excellent way to cut utility costs. It changes the temperature so the system isn’t in use when it’s cooler outside or no one is home. Some programmable thermostats can even be controlled from a PC or other device.
Check your unit at least twice each year. It’s best to have it checked before you turn it on for the summer and again for the winter. Even if you do not detect a problem, you can identify and fix any potential problems when you have it checked.
Save energy use and money by turning off the air conditioner if there is nobody home. When you turn it off, the house heats up, but only to a certain threshold. It will use more electricity if you keep it running.
Anyone can install and properly use an HVAC system. Be sure to take time to learn as much as you can. The tips here will help you as you go through the process.
To help you pick a good HVAC contractor, be sure to research a number of different companies. Look at review sites and check with the BBB. Investing the time to check out potential contractors can save you money and headaches.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/