When you start making calls to get someone to help with your HVAC system, it’s a good idea to know what system you have before that phone call. Look for the maintenance history and brand and model. This will help make sure that the contractor you hire has all the necessary information.
Many people don’t even think about their HVAC until there is an issue. However, when your unit does not work properly, you cannot get your HVAC problems off of your mind. It can be hard to get a repairman to fix your system. This article can substitute for experience and help you choose the right company.
If your HVAC is running into problems, check out each room in your house before calling for assistance. Make a list of the temperatures in each room and whether they are hot or cold. That knowledge can help the technician figure out what is going on.
Before calling someone to repair your system, make sure you know what kind of HVAC system you actually have. Write down what brand your system is along with the model number and, if they’re available, maintenance records. This will give contractor’s a better idea of what to expect before they show up, which will help things go more smoothly on arrival.
Before you choose an HVAC contractor, have an idea in your mind of what needs to be done. A contractor cannot give an accurate estimate without looking at your system. It can be harder if you don’t know what’s wrong. Learn this information to start with.
Before you ever begin looking for an HVAC contractor, first consider the entire job that you’ll need completed. You might not be able to get a price quote unless you let the contractor see your current system first. It will be way more hard if you can’t figure out what they need to do. It’s a good idea to learn this information in advance.
Clean the condenser coils and fan at the beginning of the year to help the unit run efficiently. Turn off the power if you are going to work on your HVAC system. Also, it is important to clear the outside condenser unit from any debris that maybe trapped inside.
When spring rolls around, give the condenser fan blades and coils a good clean. Shut the power off before you do anything. Remove the grill and carefully clean the blades and surrounding areas.
Help the outside condenser fan run efficiently by cleaning the coils and fan blades before the summer starts. Before you do clean the coils and fan blades, always take the precaution of turning off all power to the unit. Also, make sure you remove any debris or leaves from the condenser unit outside.
When you cut the grass, make sure your mower isn’t tossing clippings toward your outdoor units. Make sure you shoot the clippings in the other direction from the unit. This also applies to blowing leaves or moving debris. Just be careful with that exterior HVAC unit.
Clean the debris off your outdoor condenser unit. Things tend to pile up around these units, especially after storms come through, which could cause problems to your system. Left unchecked, your unit is more likely to break down.
Lubricate your condenser yearly if it has oil ports. They generally have a rubber or metal cap on them. Look for an oil that is lightweight and then put about 10 drops inside the port. You don’t want to put in too much.
Now that you know a thing or two about HVAC systems, you should feel comfortable dealing with them. If your current systems need to be repaired or even replaced, you now have the knowledge of what you should be looking for and, also, what you need to avoid. Keep the information above in your mind so you can find a good HVAC system.
It is very important that your HVAC system is serviced two times a year. This should be done in the fall and again in the spring. It doesn’t matter if your unit seems to be properly working, it is still advisable that you perform maintenance and resolve any potential problems.
Also, if you need air duct cleaning, or mold removed from your air ducts, we highly recommended this company Micro Clean DFW.