Before contacting a repair service, do a short tour of the entire home. Know what part of the house is cold and which is hot. Taking this step aids a contractor in figuring out what the problem is and how to repair it as quickly as possible.
An HVAC unit is a valuable system in your home. It ensures the home is comfortable at all times. It is a machine so it does need regular maintenance. Keep reading and you’ll get the tips you need to know when working with HVAC.
Before you ever begin looking for an HVAC contractor, first consider the entire job that you’ll need completed. You can’t get a decent estimate over a telephone, so disregard those numbers and wait until they view your system. In addition, you need to be able to tell the contractor what you have already tried. Be sure to find this out ahead of time.
Be aware of the type of system that is installed in your home prior to calling a contractor to fix it. Know the model and brand and find it’s maintenance history, if possible. This will help you give the new contractor the necessary information.
Clean your fan blades and coils each spring to ensure that your condenser fan operates at it’s best. Always shut the power off before doing any work or cleaning on the unit. Also, make sure you remove any debris or leaves from the condenser unit outside.
Make a circuit around your home before calling for help with your HVAC. Determine which rooms are hotter or colder than they should be. This can help contractors quickly figure out the issue and how to fix it easily and quickly.
If there are condenser units as part of your HVAC system, clean them often as they tend to have lots of debris. You don’t know when things are going to pile up, like right after it’s windy or rains, and that can ruin your system. The whole thing can overheat, causing major problems and possibly an enormous expense for you.
Before you hire an HVAC contractor, have some sort of idea of the work that needs to be done. A contractor will not be able to give you an accurate price without accurate information about your system. If you can’t explain anything to them, this will be even more difficult. It’s important to know this beforehand.
Clean the fan blades and coils on the condenser fan every spring. Before you get started, cut the power. Then, remove the grill, then remove the blades and begin the cleaning process of the blades and the unit.
Avoid showering your outdoor unit with grass clippings when you mow the lawn. Get the grass shot away from your unit. This also applies to leaf blowing and any other yard work that results in debris.
When you cut the grass, make sure your mower isn’t tossing clippings toward your outdoor units. Aim the grass in a different direction from the unit. This also applies when you blow leaves, so be very careful near your exterior HVAC units when you move debris.
If you have oil ports as part of the fan condenser, annual lubrication is key. You can easily find the ports as they have a rubber or metal cap. Choose an oil graded SAE 20, it is non-detergent and lightweight. Place about 10 drops into each of the ports, taking care that it does not overfill.
If you want things to be more efficient, get new units outside or have your current one moved into the shade. You save money this way because the air conditioner is now pulling in cooler air, which is easier to cool further.
As this article has shown you, you can do quite a bit to get help your HVAC system work properly. Making certain that is operates optimally is a great idea. Put this advice to good use and HVAC installation or maintenance will no longer be an issue.
Once it gets cold outside, you should turn off the outdoor condenser unit. To avoid damage, units should be turned off when temperatures are below 60 degrees. This can keep your HVAC running and can save you money on repairs.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/