Prior to putting in a service call on your HVAC, be able to identify it. Look for the model and brand number. This will give contractor’s a better idea of what to expect before they show up, which will help things go more smoothly on arrival.
The HVAC is something that needs to be maintained from time to time. A HVAC system that does no function properly can cost a ton of money. The article you’re about to read is composed of multiple tips concerning HVAC maintenance and repairs.
Every spring you should clean the coils and fan blades on your condenser fan. Turn it off first so you don’t get hurt or break something. Next, pop off the grill, pull out the blades and start cleaning them and the unit itself off gently.
Inspect the temps in your home before you call a service to help you with any HVAC issues you’re having. Make a list of the temperatures in each room and whether they are hot or cold. This will allow a contractor to quickly figure out what the issue is and how it can be fixed fast.
Make sure clippings don’t get on your outdoor units when your mowing your lawn. Make sure the grass does not get in your unit. This includes grass clippings and leaves.
What do you need done? Know this before calling a contractor. Discussing the problem is simplified if you understand what has happened with the unit. They need to come look at the unit. This is information that you should have prepared in advance.
If the fan condenser on your unit has ports for oil, make sure you lubricate it once a year. These are usually covered with rubber or metal caps. Use SAE 20 oil that is lightweight and detergent free, and put ten drops or fewer into each one. Make sure not to overfill them.
Clean your fan blades and coils each spring to ensure that your condenser fan operates at it’s best. If you are doing more than a light surface cleaning, make sure that the power is shut off to the HVAC unit. Leaves and debris can build up inside the unit and cause damage.
Put your outdoor unit in places with shade. As you get your air conditioner to suck in cool air it won’t have to do too much work to cool it which saves you some money.
If you have a fan condenser with oil ports, it needs to be lubricated every year. These ports are often covered by a rubber or metal cap. Choose an oil graded SAE 20, it is non-detergent and lightweight. Place about 10 drops into each of the ports, taking care that it does not overfill.
Turn off outdoor condenser units when weather turns cold. If it’s lower than 60 degrees, the time has come to turn it off. You will save in repair bills and increase the efficiency of your system.
A programmable thermostat can really help you out when it comes to your power bills. It changes the temperature so the system isn’t in use when it’s cooler outside or no one is home. Some can even be controlled from a computer.
Be sure to have twice annual HVAC system checks. The normally recommended time for HVAC system inspections is once before the peak cooling season when it gets hot and you’ll be using your AC, and once before the peak heating season, during the cold months when you’re likely to be using your heat. Even if you don’t notice anything wrong, you can check it out to figure out what the potential issues are.
To help keep your energy costs down, have your heating and cooling system serviced at least once a year. During the visit, the contractor will oil parts, inspect the motor and the freon levels. These simple things will keep your system running at peak performance.
Hopefully, you now feel a little more confident in your HVAC knowledge. You don’t want a HVAC system that costs you more money. Keep these tips handy so you never forget anything.
Research multiple contractors before choosing one. Check them out at the BBB and look for reviews posted by former customers. Doing these things beforehand will allow you to make a smart decision.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/