Before you call someone to help you fix your system, be sure to know what sort of system you have in place. Know the brand name and model number. It is also helpful to have the maintenance history. This will ensure that you can give your new contractor all the information they need.
The method you use to cool and heat your home is very important. Naturally, this requires a well functioning HVAC system. Without proper care, you won’t be comfortable in your home and you may spend a fortune. What follows is a compilation of tips to help you keep your HVAC system in working order.
Before choosing an HVAC contractor, think of what you wish to have done. It will be difficult for an HVAC contractor to provide you with an estimate on the phone without knowing what your current setup is. They need to come look at the unit. So, know this information in advance.
Before calling for help, know the system you have. Find out the brand and model and, if possible, dig out the maintenance history. This will enable you to give your chosen contractor any information they might need.
Clean the coils of your condenser fan each month. Before you do clean the coils and fan blades, always take the precaution of turning off all power to the unit. In addition, always remove all debris such as leaves from the outside condenser unit.
If problems arise with the HVAC system, check the entire house before contacting someone to come for repairs. Figure out which rooms are hot and cold. Doing so can help your technician fix your HVAC issue quickly.
When choosing the area for placing an outdoor compressor device, place it in a shady area. When your unit takes in cool air, it takes less energy to tool the air, thus boosting efficiency.
By the end of spring, the fan blades and coils of your condenser should be thoroughly cleaned, so operation can proceed with greater efficiency. Always make sure you shut off the power before you do any work on the unit other than superficial cleaning. Also, it is important to clear the outside condenser unit from any debris that maybe trapped inside.
Be sure to place your outdoor unit in a shady spot to maximize efficiency. This will help ensure that the AC is pulling in cooler air, reducing the amount of work it has to do and saving you money.
Every spring you should clean the coils and fan blades on your condenser fan. Make sure to turn off the fan’s power first to be safe. Secondly, pop the grill off, take the blades off and clean them as well as the actual unit.
Outdoor condenser units need to be turned off when the weather turns cold. This should be done when the temperature drops below 60ºF to avoid damage. Your system will work longer for you this way.
When you’re trying to cut your grass, don’t cover a unit outside with the clippings. Make sure the grass does not get in your unit. This same tip applies when you are blowing fallen leaves around the yard. Grass and leaves pose a serious problem for the internal functioning of your unit.
If at all possible, install double-paned windows in your home instead of those with a single pane. Windows that are double pane keep the cool air in and can greatly reduce the amount of time your air conditioner will need to run. When it is cold in the winter months, these same windows will keep the warm air inside as well.
Now you have a better idea of what must be done. You must stay on top of things! These tips will keep your home comfortable year-round.
Turn your AC off if no one is at home. Your home will become somewhat warmer during this time. The longer the unit stays on, the more it ends up costing you in energy bills.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/