To make sure your condenser fan works properly, keep the fan blades and the coils clean. Prior to working on or cleaning the unit, be sure to turn off the power. In addition, always remove all debris such as leaves from the outside condenser unit.
It’s not easy to know what to do when you’re dealing with HVAC. To keep yourself from having a problem with this, you really should spend your time to learn what you can on this subject. This article was written to help homeowners get the proper help they need for their HVAC unit.
Each spring, try cleaning the fan blades and coils on the condenser fan. First, the power should be turned off so things don’t move as you work. Take the grill off and pull the blades out to clean them.
What system do you have? You need this information to tell your contractor. Write down the make, model, and any maintenance history. Your contractor will appreciate this information.
Make sure that you do not cover your outdoor components with grass clippings when you are trimming the grass. Make certain the debris goes away from it. The same goes for when you blow leaves, so make sure your are careful when moving any debris in the vicinity of your HVAC devices.
Clean your outdoor condensers often. You never know when things can pile up, especially after a windy or rainy storm, and that can throw a wrench in your system. Overheating could occur, which will be problematic.
Leaves falling from trees can wreak havoc with your HVAC unit. Make sure the unit’s fan grill is cleaned frequently when the leaves begin to fall. The fan must stay clear in order to function, and if it gets blocked, you will have to contend with problems.
You need to lubricate parts of your fan condenser. These ports are often covered by a rubber or metal cap. Choose a SAE 20 oil whch is lightweight and non-detergent and place 10 drops or less into each port, ensuring it doesn’t overfill.
Find a place that is shaded for your compressor. The cooler air entering the unit will require less work to get to the proper temperature.
A shady spot is always a good choice for the placement of your outdoor compressor. When it draws in air for cooling, it will be more efficient because it will not need to work as hard to cool down the air.
Put outdoor units in the shade if you are installing them. As your air conditioner sucks in cool air, little will have to be done to cool it any further, saving you a ton on your energy bills.
Place your HVAC unit in the shade to boost efficiency. It will help you save on your energy bill when you do this.
It is very important that your HVAC system is serviced two times a year. The ideal thing to do would be to have it checked out in the fall and spring so you’re able to figure out if everything is ready for the cold and hot months. Check it out just to be safe even if there is nothing broken.
Your system should be checked twice a year. Ideally, you should have it looked at in the spring and fall so you know everything is set for the hot and cold months. Even if everything seems okay, it doesn’t hurt to check things out.
When colder weather arrives, switch off all outdoor condenser units. If the outside temp is under 60 degrees, turn the unit off to prevent damage. This simple tip will help keep the system running efficiently for many years to come.
It is indisputable that a collapse of a home’s heating or cooling system during the depths of winter or the sweltering days of summer can be a real mess for any homeowner. But if they know what’s going on, they can quickly fix the situation. The tips you learned here can help you to make a great HVAC choice when the time comes.
Installing a programmable digital thermostat can help save money. A programmable thermostat can save you up to ten percent on your cooling and heating costs by simply turning the thermostat back ten to fifteen percent for eight hours a day. Also, you’ll find that you can program your thermostat from a computer or anything connected to the web.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/