Before calling anyone to repair your system, know what system you have. Know the brand name and model number. It is also helpful to have the maintenance history. This will ensure that you can give your new contractor all the information they need.
It’s not so difficult to get into HVAC if you know what you’re doing. This article can help you out. Just continue reading and by the time you’re through, you’ll know something about HVAC systems that you didn’t know when you began!
If your HVAC system is acting up, take a tour of the house prior to calling a professional. Find out which rooms are hot and which are cold. If you do this, it will be a great help to the future contractor, who will now be able to quickly locate the problem issue.
Be aware of the type of system that is installed in your home prior to calling a contractor to fix it. Get the brand, model name, and if you can you should get the maintenance history out. Then, you’ll be ready to tell the contractor what they need to know.
If your unit is outdoors, clean them regularly. Debris can pile up at rates that increase during rainy or windy weather, and this can foul up the inner workings of your system. It may even overheat, which can ruin your system.
Before you ever begin looking for an HVAC contractor, first consider the entire job that you’ll need completed. It’s hard to get an estimate since they haven’t look at your system. If you can’t explain changes you’ve made, the process will be even more difficult. It’s important to know this beforehand.
You should clean your condenser fan’s blades and coils every spring. Make sure to turn off the fan’s power first to be safe. Next, pop off the grill, pull out the blades and start cleaning them and the unit itself off gently.
Clean your fan and coils when the weather begins to warm. Always shut the power off before doing any work or cleaning on the unit. Leaves and debris can build up inside the unit and cause damage.
Be careful when doing yard work that you do not get debris on or in your unit. Make sure the grass does not get in your unit. The same should happen if you are blowing leaves, so be especially careful when you are going by your exterior HVAC devices whenever you are moving debris.
Each spring it’s time to clean the inside of your condenser unit, including the fan and the sensitive coil. Make sure to turn off the fan’s power first to be safe. Secondly, pop the grill off, take the blades off and clean them as well as the actual unit.
If your condenser comes with oil ports, you should lubricate it yearly. You will notice these ports have a rubber or metal cap covering them. Use SAE 20 oil that is non-detergent and lightweight, and put 10 drops or fewer in each port, but make sure to avoid overfilling them.
When you’re trying to cut your grass, don’t cover a unit outside with the clippings. Aim the grass clippings in the other direction. Make sure you move around the unit and blow the leaves away from it while blowing your leaves.
Once it grows cold outside, turn off your outside condenser unit. This should be done when the temperature drops below 60ºF to avoid damage. This will allow your system to work well every year, and that saves you quite a bit on making repairs.
As you can see, information goes a long way in understanding. Be sure you pay close attention to everything as you learn. Use the tips here to help you get to work now!
Installing a programmable digital thermostat can help save money. A programmable thermostat can save you up to ten percent on your cooling and heating costs by simply turning the thermostat back ten to fifteen percent for eight hours a day. Some newer programmable thermostats have computerized controls you can access from your personal computer, laptop or mobile media device.
https://www.greenleafair.com/product-category/trane-systems/
–
–
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/