Before calling anyone to repair your system, know what system you have. Look for the model and brand number. In this way, you can be sure your repair person has all vital information.
Not all homeowners are expert HVAC specialists. If so, when a problem occurs it can be frustrating. The following tips can help anyone make good decisions.
If problems arise with the HVAC system, check the entire house before contacting someone to come for repairs. Make a list of the temperatures in each room and whether they are hot or cold. This can help the contractor determine the problem areas quickly and fix the problem easily.
When you start making calls to get someone to help with your HVAC system, it’s a good idea to know what system you have before that phone call. Know the model and brand and find it’s maintenance history, if possible. The contractor will likely need all of this information.
Help the outside condenser fan run efficiently by cleaning the coils and fan blades before the summer starts. Always shut the power off before doing any work or cleaning on the unit. Remove leaves and debris from the condenser outside.
It is important to have some knowledge of your present system and needs before calling a contractor. This will make the quote process much easier. It will be more difficult for him to assist you over the phone without the information readily available. So, know this information in advance.
Be sure to clean the fan blades and coils of the condenser fan. Be sure to turn the power off first; you don’t want anything to move. Pull out each of the blades and clean them one by one.
To make sure your condenser fan works properly, keep the fan blades and the coils clean. The power to the unit should be removed before you begin any maintenance, even cleaning. Remove leaves and debris from the outside condenser.
Be sure you have the HVAC unit in your home checked about two times every year. Check into it twice a year before you head into the hot and cold months. Even if you do not detect a problem, you can identify and fix any potential problems when you have it checked.
If you have outside condenser units, make sure to regularly clean the debris that builds up. Your HVAC system may run into problems after storms if it is surrounded by debris. It can also cause it to overheat.
When it gets cold outside, turn off the outdoor condensers. If it’s lower than 60 degrees, the time has come to turn it off. This helps your system remain in good working order.
Make sure that you do not cover your outdoor components with grass clippings when you are trimming the grass. When you work with your lawn mower, make sure it spits the grass to the side opposite of your unit. The same goes for when you blow leaves, so make sure your are careful when moving any debris in the vicinity of your HVAC devices.
Make use of a thermostat when you are installing an HVAC. This will help you to keep the temperature at optimal levels. In addition, some models make things really easy on you, allowing you to adjust them from the computer.
Having an HVAC break is something nobody wants to have happen. This process is not as bad as you think though. By using the advice here and keeping it at your side, you can be sure that you’ll know what to do to take care of your issues.
If there isn’t anyone at home, then there’s no need for the AC unit to be running and wasting electricity. This will save you money on your energy bills. Leaving it on all the time only makes it work harder and results in a larger utility bill.
call us today so you can get your system install for lower price
Also, if you need air duct cleaning, or mold removed from your air ducts, we highly recommended this company Micro Clean DFW.