Go through your home before you call HVAC professional. Make a list of the rooms which are comfortable and which just aren’t. You can then relay this information to the technician so that they can more easily figure out what the problem is.
When you think about an HVAC system, it may seem complicated at first. There is indeed lots to think about surrounding this subject. But, there is lots of information you can access to help you learn more.
What do you need done? Know this before calling a contractor. It will be difficult for an HVAC contractor to provide you with an estimate on the phone without knowing what your current setup is. You need to know how to describe any issues. So, know this information in advance.
Check out the system that you have before you call a professional. Know what the manufacturer’s name is, which particular model you have and what’s gone on with the unit in the past. This information will be helpful to any contractor you hire to repair it.
Make sure your condenser fan is in good working order by wiping down the fan blades and the coils. Shut the power off before you do anything. Then remove the grill, remove the blades and clean it from top to bottom gently.
Before choosing an HVAC contractor, think of what you wish to have done. A contractor will be hard pressed to provide you with an over-the-phone estimate if unfamiliar with your system. They also won’t be able to offer you a quote if they don’t have a detailed idea of what you want done. So, you should know this beforehand.
Make sure clippings don’t get on your outdoor units when your mowing your lawn. Aim the grass in a different direction from the unit. This same tip applies when you are blowing fallen leaves around the yard. Grass and leaves pose a serious problem for the internal functioning of your unit.
When you’re trying to cut your grass, don’t cover a unit outside with the clippings. Get the grass shot away from your unit. The same should happen if you are blowing leaves, so be especially careful when you are going by your exterior HVAC devices whenever you are moving debris.
HVAC units may suffer when leaves are falling off the trees. Make sure you clean out your fan grill often once nearby trees start shedding their leaves. The fan must be unobstructed to work properly, and if it becomes blocked, it could cause your system to break down.
Try to prevent debris from getting in your HVAC unit. Make sure the unit’s fan grill is cleaned frequently when the leaves begin to fall. Because the fan requires a clear path for air to enter, you may encounter issues with your system if the fan gets blocked up.
If the house is yours or you’re permitted to, replace the windows that are single pane with windows that are double pane. Having a double pane window helps limit your need for air conditioning during the summer months. This will also help you keep in heat when it gets cold.
When selecting the spot to put the outdoor compressor for your unit, choose somewhere that gets plenty of shade. When your unit takes in cool air, it takes less energy to tool the air, thus boosting efficiency.
Turn your AC off if no one is at home. By raising the temperature from, for example 78 to 80, your house will be warmer, but only up to 80 before your AC kicks in. If you decide to set the temperature to 82 or 83 or so on, your AC won’t go on until it reaches that temperature. Leaving it on all the time only makes it work harder and results in a larger utility bill.
Ideally, you feel more informed about how your HVAC works. Motivate yourself to start using what you’ve learned. You won’t regret it!
Don’t let your home get overly hot. Your average AC unit can only reduce the temperature in your home by about 20 degrees in a normal span of time. If the temperature in your home reaches 100 degree Fahrenheit, it will only reduce it to 80 or more. While it depends on the humidity, this is not safe for a human to sleep in to recover from the heat of the summer.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/