Know the name and type of your HVAC system before looking for a repair person. Take a look at the system or the owner’s manual to find the name and model number. This will facilitate the process when your contractor asks for this information.
For a lot of homeowners it’s hard to know who to call when their cooling or heating system starts to fail. If you want to avoid this disaster, familiarize yourself with local HVAC companies. The choice will be much easier. The advice here will help any homeowner know what to do with their system.
Before selecting a HVAC repairman, know what you need done. This is necessary so that they can give you a quote before doing any work. If you can’t explain changes you’ve made, the process will be even more difficult. So be aware of this information ahead of time.
Prior to putting in a service call on your HVAC, be able to identify it. Take a look at the system or the owner’s manual to find the name and model number. The contractor will likely need all of this information.
Clean the coils and blades in your condenser at the beginning of summer. Before you do clean the coils and fan blades, always take the precaution of turning off all power to the unit. Clean the outside of your condenser unit regularly.
Before contacting a repair service, do a short tour of the entire home. Make a list of the temperatures in each room and whether they are hot or cold. This will help your contractor quickly determine where the issue lies and how to get it fixed quickly and easily.
Outdoor condenser units need to be cleaned regularly. Debris can pile up after a storm, bringing potential damage with it. The whole thing can overheat, causing major problems and possibly an enormous expense for you.
Clean the fan blades and coils prior to summertime. Always shut off all power to your unit for any work beyond superficial cleaning. In addition, be sure to get rid of any leaves or other debris that may have accumulated on the outside condenser.
Make certain that you clean your condenser when the weather begins to warm. Turn the power off so nothing moves. Then remove the grill, remove the blades and clean it from top to bottom gently.
Every spring you need to make sure your condenser fan’s coils and blades on the fan part are clean. Before you do so, shut off the power to ensure that none of the parts will move while you work on it. Then you need to get the grill popped off and get the blades out so you can clean them and your unit gently.
When you cut the grass, don’t cover the outdoor units with their clippings. Make certain the debris goes away from it. Also do this when blowing leaves or shoveling snow.
It is indisputable that a collapse of a home’s heating or cooling system during the depths of winter or the sweltering days of summer can be a real mess for any homeowner. However, if the homeowner has usable knowledge, a complete catastrophe can be avoided. The suggestions in the above article should lead homeowners to making smart decisions when it comes to their HVAC system.
If the fan on your condenser includes oil ports, they must be lubricated annually. Most of these ports have some sort of protective cap covering them. You should select an SAE 20 oil since it is lightweight and does not contain detergent. Be sure to use just 10 drops or so, or your system may overfill.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/