Before calling anyone to repair your system, know what system you have. Learn the brand, model, and if you have it, the maintenance history. This will facilitate the process when your contractor asks for this information.
The HVAC system you have in your house is not something you know about until it no longer works. Once that happens, fixing the issue quickly is critical. It can be confusing to understand which company should hire to work on your system correctly. The best way to find one is by reading the following article.
Tour your home before calling a contractor. Find out which rooms are hot and which are cold. This will help the repairman determine what the problem is.
What system do you have? You need this information to tell your contractor. Write down what brand your system is along with the model number and, if they’re available, maintenance records. Your contractor will appreciate this information.
Before you hire an HVAC contractor, have some sort of idea of the work that needs to be done. Providing you with an accurate estimate over the telephone may be difficult to impossible is they can’t see the system you have. It will be even harder if you cannot explain what you have done. This is information that you should have prepared in advance.
Before contacting a repair service, do a short tour of the entire home. Note which of your rooms are hot and which are cold. That knowledge can help the technician figure out what is going on.
If you have units that are condensers outside of the home, keep them free of debris. After a wind or rain storm things may pile up, causing problems with your system. Overheating can occur, which often spells disaster for your system.
Think about what improvements you want made before picking an HVAC contractor. This is necessary so that they can give you a quote before doing any work. It will be even harder if you cannot explain what you have done. Know the right information ahead of time.
Clean your condenser’s fan blades and coil in the spring. Before you begin cleaning the unit, make sure that it is unplugged. Then you need to get the grill popped off and get the blades out so you can clean them and your unit gently.
Clean the fan blades and coils prior to summertime. Except when cleaning the outside, turn the unit off when performing any type of maintenance. Also, make sure you remove any debris or leaves from the condenser unit outside.
When you mow your lawn, take care that you don’t get grass clippings all over your outdoor unit. Make sure the grass does not get in your unit. If you’re blowing leaves, this same problem can occur, so make sure you move around the unit and blow the leaves away from it.
Clean the condenser on your debris regularly. Your HVAC system may run into problems after storms if it is surrounded by debris. It could overheat and cause a disaster with your unit.
If the condenser fan has oil parts, then you need to lubricate it at least once per year. Such ports tend to have coverings made of rubber or metal. Choose an oil graded SAE 20, it is non-detergent and lightweight. Place about 10 drops into each of the ports, taking care that it does not overfill.
Each spring it’s time to clean the inside of your condenser unit, including the fan and the sensitive coil. For safety, always turn the power off first. Remove the grill and carefully clean the blades and surrounding areas.
Boost energy efficiency by putting your condenser unit in the shade. When the air conditioner pulls in cooler air, it won’t have to do much more to cool it and that will save you a lot of money on energy bills.
Your head is likely full of new information now! Put it to use on a variety of HVAC systems. If you need to have your existing system repaired or replaced, you will know what to look for and what to avoid. Use this advice to get the right one.
To cut energy costs, you should service your cooling and heating system once a year at least. This visit will include a motor inspection and checking the freon. These repairs will keep your HVAC system running smoothly.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/