Before calling anyone to repair your system, know what system you have. Learn the brand and the model. This will enable you to give your chosen contractor any information they might need.
Although many people have an interest in learning about their HVAC, many believe it is too difficult to handle. You shouldn’t let this hold you back, though. Use these thoughts to help increase your understanding.
Before you ever begin looking for an HVAC contractor, first consider the entire job that you’ll need completed. It’s hard to get an estimate since they haven’t look at your system. In addition, you need to be able to tell the contractor what you have already tried. Be sure to find this out ahead of time.
Keep outside condenser fans running smoothly by cleaning fan blades and coils before the summer begins. Always shut the power off before doing any work or cleaning on the unit. Remove leaves and debris from the condenser outside.
Clean your fan and coils when the weather begins to warm. Always shut off all power to your unit for any work beyond superficial cleaning. Also, be sure to clear leaves and debris from your condenser unit.
Each spring it’s time to clean the inside of your condenser unit, including the fan and the sensitive coil. Don’t forget to disconnect the power first. Then, take the grill off, pull the blades out, and gently clean them as well as the unit itself.
If your unit is outdoors, clean them regularly. Wind can pile up all sorts of debris against its grill. This can lead to overheating.
When you cut the grass, make sure your mower isn’t tossing clippings toward your outdoor units. Shoot grass the other way. The same goes for when you blow leaves, so make sure your are careful when moving any debris in the vicinity of your HVAC devices.
Every spring you should clean the coils and fan blades on your condenser fan. For safety, always turn the power off first. Remove the grill and carefully clean the blades and surrounding areas.
A big mistake that people make is cutting the grass next to the outdoor condenser unit and allowing all of the clippings to blow inside the fan and coil. Aim the grass clippings in the other direction. This is the same if you are using a leaf blower.
Make sure you have your HVAC system checked at least twice a year. The best time of year to have the system checked is right before the weather begins to change. Even if everything seems fine, check things out to find potential problems.
Make sure your HVAC unit is in the shade. It will reduce the temperature of the air going into the unit, meaning that it will not have to work as hard to cool it.
Putting in a programmable thermostat is a smart way to cut back on air-conditioning costs. A thermostat that’s programmable is going to save you around ten percent on the heating and cooling costs you have to pay when you turn it back about fifteen percent for a part of the day. Take advantage of the convenience of the ability to control many programable thermostats from your favorite electronic device.
Turn off any outdoor condensers you have when the weather gets cold. When the temperature drops beneath 60 degrees, it’s time to cut off the unit to prevent damage. This will maximize the life of your unit.
HVAC maintenance isn’t terribly difficult, especially if you have some helpful advice like that found in the tips above. Utilize these tips when you are installing your HVAC unit. Begin the process to help you figure out how the HVAC system works!
Putting in a programmable thermostat is a smart way to cut back on air-conditioning costs. Programmable thermostats can reduce your power HVAC energy costs by as much as ten percent, just by dialing back your thermostat ten or fifteen percent up to eight daily hours. Plus, some models allow you to control them over the internet or from a smartphone.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/