Before you start calling to find someone to fix your unit, make sure you know the type of system that is installed. Look for the maintenance history and brand and model. This makes sure your contractor will be sufficiently prepared.
The HVAC system is something many people would like to know about, but they think it is too difficult to tackle. Of course, every little bit of information will improve your understanding. With this article, you’ll find some advice that makes this topic easy to understand.
Check the whole house before you call for help. Make note of which rooms are cold and which are hot. Taking this step aids a contractor in figuring out what the problem is and how to repair it as quickly as possible.
Before you start calling to find someone to fix your unit, make sure you know the type of system that is installed. It is important to understand what model it is and which brand it is. Also, if it has been serviced before, you should have that information handy. That way you can provide the contractor with all the necessary information.
It is important to have some knowledge of your present system and needs before calling a contractor. They won’t be able to offer you a quote if they haven’t seen your system. Getting an estimate will be even more difficult if you cannot adequately describe the problem. So, figure out this information before anything else.
By the end of spring, the fan blades and coils of your condenser should be thoroughly cleaned, so operation can proceed with greater efficiency. Except when you do superficial cleaning, you need to always make sure the power is off on the unit. Take away all of the debris as well.
By the end of spring, the fan blades and coils of your condenser should be thoroughly cleaned, so operation can proceed with greater efficiency. Before you do clean the coils and fan blades, always take the precaution of turning off all power to the unit. Clean the outdoor condenser as well.
If your unit is outdoors, clean them regularly. After a wind or rain storm things may pile up, causing problems with your HVAC system. Overheating may be the result if you don’t.
As the leaves are falling off the trees, your HVAC system can really take a hit. When you see nearby trees shedding their leaves, clean the fan grill on your unit constantly. A blocked unit can quickly become a broken unit.
When you cut the grass, make sure your mower isn’t tossing clippings toward your outdoor units. Try shooting the clippings away from it. Do the same when blowing snow or leaves.
If you have oil ports as part of the fan condenser, annual lubrication is key. You’ll find these ports are covered with a metal or rubber cap. Use SAE 20 oil that is lightweight and detergent free, and put ten drops or fewer into each one. Make sure not to overfill them.
When the trees are losing their leaves, your HVAC unit can suffer. Clean outdoor units often to remove leaves. The fan needs unobstructed air flow, and if debris is blocking this air flow, then your system could suffer.
Understanding your HVAC system is not that complicated if you read the helpful tips in the above article. You won’t be able to learn how to deal with this type of stuff without learning these tips, so keep these things in mind. Start today and in the end you’ll succeed!
You need to have a contractor review your unit twice a year. Ideally, you should have it looked at in the spring and fall so you know everything is set for the hot and cold months. It doesn’t matter if your unit seems to be properly working, it is still advisable that you perform maintenance and resolve any potential problems.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/