Powered by Top Rated Local®
Customer reviews
Google reviews
by admin in Blog 0 comment

Before calling anyone to repair your system, know what system you have. Know what the manufacturer’s name is, which particular model you have and what’s gone on with the unit in the past. This will ensure that you can give your new contractor all the information they need.

TIP! Before you call someone to help you fix your system, be sure to know what sort of system you have in place. Know what the manufacturer’s name is, which particular model you have and what’s gone on with the unit in the past.

HVAC information has been sweeping the nation as more and more people are becoming interested in performing the maintenance and repairs themselves. However, it’s still a complicated subject. However, this does not need to be true. The following article offers great suggestions for you to follow to help make this easier.

Don’t hire a contractor until you know a little about what you are facing. A contractor will be hard pressed to provide you with an over-the-phone estimate if unfamiliar with your system. It’s even harder if you’re not able to explain what you’ve done. So, you should know this beforehand.

TIP! What do you need done? Know this before calling a contractor. It’s hard for these contractors to give phone estimates without seeing the current system you have.

Know what you need before you hire a contractor. They won’t be able to offer you a quote if they haven’t seen your system. It’s even harder if you’re not able to explain what you’ve done. So, figure out this information before anything else.

Clean your fan and coils when the weather begins to warm. Except when you do superficial cleaning, you need to always make sure the power is off on the unit. Leaves and debris can build up inside the unit and cause damage.

TIP! To make sure your condenser fan works properly, keep the fan blades and the coils clean. Always make sure you shut off the power before you do any work on the unit other than superficial cleaning.

Every spring you should clean the coils and fan blades on your condenser fan. Start by turning off the power to avoid having anything move when you work on it. Then, remove the grill, then remove the blades and begin the cleaning process of the blades and the unit.

If the condenser for your HVAC system is located outside, make sure you clear away any debris that might settle in or around it. The dirt could pile up and harm your system. If you do not, the unit may get too hot and cause additional problems.

For maximum efficiency, place outdoor units in a shady spot. It will help you save on your energy bill when you do this.

Don’t get grass clippings on your outside unit. Direct the clippings away from the equipment. Also do this when blowing leaves or shoveling snow.

TIP! A big mistake that people make is cutting the grass next to the outdoor condenser unit and allowing all of the clippings to blow inside the fan and coil. Turn your lawnmower in the opposite direction.

Your system should be checked twice a year. Generally, you want it done in the fall and the spring. You should have it looked at even if no problems are occurring; there could still be a problem or potential problem.

Check to determine if the fan condenser on your HVAC system is equipped with oil ports, and if it is, be sure to lubricate every year. You can find these ports covered with rubber or metal caps. Choose a SAE 20 oil whch is lightweight and non-detergent and place 10 drops or less into each port, ensuring it doesn’t overfill.

TIP! If the condenser fan has oil parts, then you need to lubricate it at least once per year. Most of these ports have some sort of protective cap covering them.

Turn off outdoor condenser units when weather turns cold. If temps go below 60 you run the risk of damaging a unit that remains on. This helps your system remain in good working order.

If you want to know where you should put an outdoor compressor, you should place it somewhere where there is a lot of shade. The cooler air entering the unit will require less work to get to the proper temperature.

Pane Windows

Put your outdoor unit in places with shade. If the air your machine draws in is already cooler, it will require less energy to regulate before it’s filtered into your home.

TIP! Make sure your HVAC unit is in the shade. This will help ensure that the AC is pulling in cooler air, reducing the amount of work it has to do and saving you money.

If you own your own home or have permission from your landlord, replace your single pane windows with double paned versions. During the summer, the use of double-pane windows will help keep the cool air locked inside of the home. Likewise, heat is better retained during the winter.

It is very important that your HVAC system is serviced two times a year. Most homeowners choose to have their unit inspected during the spring and the fall months. This helps prepare for the coming weather changes of summer and winter. You should have it looked at even if no problems are occurring; there could still be a problem or potential problem.

TIP! Have your heating and cooling system inspected twice a year. This should be checked often for debris and malfunctions.

This advice should make your HVAC issues a piece of cake to deal with. Remember to refer to these tips often along the way. Start as soon as you can for the best results.

When colder weather arrives, switch off all outdoor condenser units. If you get into temperatures that are less than 60 degrees you need the unit to be shut off so it doesn’t get damaged. This will ensure your system stays in good working order every year, saving you money on costly repairs.

Trane 4 Ton 16 Seer Gas System Complete Install Include

Trane 3 Ton 14 Seer Gas System Installed

https://www.greenleafair.com/product-category/trane-systems/

Trane 4 Ton 16 Seer Gas System Complete Install Include

Micro Clean Air Duct Cleaning https://www.microcleandfw.com/