Know the name and type of your HVAC system before looking for a repair person. Look for the maintenance history and brand and model. This will facilitate the process when your contractor asks for this information.
Most people live in areas where an HVAC system is necessary in their home to keep the temperature controlled. They serve to maintain comfortable temperatures year round. Because it is a mechanical system, it calls for the help of a professional installer. Keep reading and you’ll get the tips you need to know when working with HVAC.
Inspect the temps in your home before you call a service to help you with any HVAC issues you’re having. Notice the temperature in each room. Are some cooler or hotter than others? Figuring this out will the contractor to diagnose the issues and quickly get to work on fixing it.
Before calling anyone to repair your system, know what system you have. It is important to understand what model it is and which brand it is. Also, if it has been serviced before, you should have that information handy. Then, you’ll be ready to tell the contractor what they need to know.
Clean your fan blades and coils each spring to ensure that your condenser fan operates at it’s best. Before you clean the surface, be sure to turn off the power. Clean off any leaves or debris from your external condenser unit.
Clean the coils of your condenser fan each month. Except when you do superficial cleaning, you need to always make sure the power is off on the unit. Remove leaves and debris from the outdoor unit.
Clean the debris off your outdoor condenser unit. You don’t know the amount of stuff that can pile up right after heavy winds or a storm. It can cause your system to malfunction by overheating.
The coils and blades on the fans should be cleaned once a year. Before you get started, cut the power. Pull out each of the blades and clean them one by one.
Leaves and debris can damage your system. Make sure the unit’s fan grill is cleaned frequently when the leaves begin to fall. When the fan becomes obstructed, you will lose out on quality air.
When you’re trying to cut your grass, don’t cover a unit outside with the clippings. Make sure the grass does not get in your unit. This same tip applies when you are blowing fallen leaves around the yard. Grass and leaves pose a serious problem for the internal functioning of your unit.
Update the windows in your home to double-paned if you own it. Double pane windows can minimize the use of your air conditioner in hot weather since they keep the indoor air cooler. It also facilitates heat retention in winter.
When choosing the area for placing an outdoor compressor device, place it in a shady area. The cooler air entering the unit will require less work to get to the proper temperature.
Install a thermostat you can program to save money on cooling your home. In fact, you can save as much as 10 percent on both heating and cooling when you turn your thermostat by by 10-15 percent for at least 8 hours daily. Furthermore, there are a few programmable thermostats that you can control from your computer or any other web-connected device.
As this article shows, there are things which can be helpful when dealing with HVAC systems and contractors. The system needs to be correctly installed and maintained for best results. Take the solid ideas from the above article to ensure that you know the best way to have an HVAC unit installed, and there is proper maintenance done.
If everyone is out, turn the air conditioner off. Turning it off does allow the temperature to rise, but only so far. If it’s left on all day, it will fight the heat all day, which uses quite a bit of electricity.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/