Be aware of the type of system that is installed in your home prior to calling a contractor to fix it. Get information on the make and model, plus if you have information on the history of maintenance, that will help, too. Your contractor will appreciate this information.
Many people do not give their HVAC units a second thought until it quits working. When that occurs, it is then urgent. It can be confusing to understand which company should hire to work on your system correctly. The following article offers suggestions on how to navigate through the whole process.
Before choosing a HVAC company find out what the company offers. You might not be able to get a price quote unless you let the contractor see your current system first. It can be harder if you don’t know what’s wrong. It’s important to know this beforehand.
Make a circuit around your home before calling for help with your HVAC. Know what part of the house is cold and which is hot. This will allow a contractor to quickly figure out what the issue is and how it can be fixed fast.
To make sure your condenser fan works properly, keep the fan blades and the coils clean. Turn off your power before doing any job like this. Remove leaves and debris from the outside condenser.
Before selecting a HVAC repairman, know what you need done. You might not be able to get a price quote unless you let the contractor see your current system first. It will be even harder if you cannot explain what you have done. Know this stuff ahead of time.
Clean the debris on your condenser units. You don’t know the amount of stuff that can pile up right after heavy winds or a storm. It will damage the system by overheating.
To make sure your condenser fan works properly, keep the fan blades and the coils clean. Always turn the unit off before you do anything to it, including leaning. If you see debris, get rid of it.
When you are cutting the grass, be sure not to cover your outdoor units with clippings. Try shooting the clippings away from it. The same goes for blowing leaves, so always be careful if you are moving debris near your HVAC devices.
You should clean your condenser fan’s blades and coils every spring. Before you begin cleaning the unit, make sure that it is unplugged. Remove the grill and carefully clean the blades and surrounding areas.
Try to prevent debris from getting in your HVAC unit. Make sure you clean out your fan grill often once nearby trees start shedding their leaves. Because the fan requires a clear path for air to enter, you may encounter issues with your system if the fan gets blocked up.
Grass Clippings
If the fan on your condenser includes oil ports, they must be lubricated annually. These ports are typically covered with caps made of metal or rubber. Buy an SAE 20 product that is lightweight, and then put no more than ten drops into the ports.
Do not allow grass clippings to cover the outdoor unit of your HVAC system. Direct the grass clippings in a direction away from the HVAC unit. The same goes for when you blow leaves, so make sure your are careful when moving any debris in the vicinity of your HVAC devices.
Have the HVAC system serviced twice per year. Ideally, you should have it looked at in the spring and fall so you know everything is set for the hot and cold months. Even if you can’t see anything wrong, checking it may help you locate and repair some possible issues.
Your head is likely full of new information now! Put it to use on a variety of HVAC systems. If your current system needs to be replaced or repaired, you’ll know what things to look out for and what things to avoid. Keep this advice in mind to find the right system.
Turn off any outdoor condensers you have when the weather gets cold. To avoid damage, units should be turned off when temperatures are below 60 degrees. This will ensure your system works well each year, which could save you quite a bit in repair costs.
https://www.greenleafair.com/product-category/trane-systems/
–
–
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/