Know the name and type of your HVAC system before looking for a repair person. Take a look at the system or the owner’s manual to find the name and model number. The contractor will likely need all of this information.
When the HVAC system fails, you may not understand the next steps to take. The more prepared you are on this topic, the less of a disaster it will be. These tips will help you choose a more efficient HVAC contractor than you normally could.
What do you need done? Know this before calling a contractor. You might not be able to get a price quote unless you let the contractor see your current system first. If you can’t explain anything to them, this will be even more difficult. So be aware of this information ahead of time.
If you have some problems with the HVAC system, check out your home before calling a contractor. Figure out which rooms are hot and cold. You can then relay this information to the technician so that they can more easily figure out what the problem is.
Clean the condenser coils and fan at the beginning of the year to help the unit run efficiently. Except when you do superficial cleaning, you need to always make sure the power is off on the unit. Also, be sure to clear leaves and debris from your condenser unit.
Before choosing an HVAC contractor, think of what you wish to have done. It’s hard for these contractors to give phone estimates without seeing the current system you have. If you don’t have any idea, they will have trouble giving you any sort of quote. So, know this information in advance.
Clean the condenser on your debris regularly. You can never tell when things will pile up, especially following rain or wind storms. These can wreak havoc on your units. This can lead to overheating.
System Checked
Each spring it’s time to clean the inside of your condenser unit, including the fan and the sensitive coil. Shut the power off before you do anything. Next, remove the grill, take the blades and clean them gently, then clean the actual unit.
Make sure you have your HVAC system checked at least twice a year. The best times to have the system checked is spring and fall, so you are sure everything is running at peak performance before the heating and cooling seasons. This type if preventative maintenance is highly necessary to ward off any expensive troubles from coming your way.
When you cut the grass, don’t cover the outdoor units with their clippings. Aim the grass clippings in the other direction. This also applies to leaf blowing and any other yard work that results in debris.
Condenser units for the outdoors should be shut off when it starts to get cold outside. This should be done when the temperature drops below 60ºF to avoid damage. You’ll pay less for repairs which you follow this tip.
Turn off your outdoor condenser when it becomes cold out. If it’s less than 60 degrees outside, turn the unit off. This will ensure your system works well each year, which could save you quite a bit in repair costs.
One way to save some money with A/C is by having a programmable thermostat installed. A thermostat that’s programmable is going to save you around ten percent on the heating and cooling costs you have to pay when you turn it back about fifteen percent for a part of the day. Additionally, some models of programmable thermostats actually allow you to control them remotely from your office computer or cell phone.
Equipping your home with a programmable thermostat can be an excellent way to cut utility costs. This will help you to keep the temperature at optimal levels. Also, you can find a thermostat that is controllable from a computer or smart phone.
When HVAC fails, everyone feels miserable. But, if they get the right kind of information before they get started with this, it won’t be so bad. The tips you learned here can help homeowners make informed decisions regarding their HVAC systems.
Service your hearing and cooling systems once each year. When they come out for a service visit, expect inspections of freon levels and the motor, and they will oil all the moving parts. This ensures your system runs smoothly.
https://www.greenleafair.com/product/4-ton-trane-xr-16-seer-condenser/
https://www.greenleafair.com/product/trane-3-ton-14-seer/
https://goo.gl/maps/yj9Nuw5R8yq
https://www.greenleafair.com/product-category/trane-systems/
https://www.greenleafair.com/product/4-ton-trane-xr-16-seer-condenser/