If your HVAC doesn’t seem to be working properly, check things out yourself prior to calling in a technician. Figure out which rooms feel hot and which feel cold. This information will help the contractor determine where the problem is and how to fix it.
A HVAC system that works is important for an enjoyable home. It’s a great feeling when you come in from a sweltering day, and it’s cool inside, or you come in from a very blustery winter day to the warmth of the inside. But if you experience a failure of your HVAC system, it can be a nightmare. You must learn proper maintenance for these systems; the article below can help with that.
Clean the debris on your condenser units. Things pile up after storms and damage your system. It can also cause it to overheat.
If you have some problems with the HVAC system, check out your home before calling a contractor. Make a list of the temperatures in each room and whether they are hot or cold. You can then relay this information to the technician so that they can more easily figure out what the problem is.
Clean the fan blades and coils on the condenser fan every spring. First, turn the power off so nothing moves when you’re working with it. Remove the grill and carefully clean the blades and surrounding areas.
Prior to choosing an HVAC customer, try to have an idea of what you want done. It will be hard for a contractor to give you a price estimate over the phone if they have not seen your current system. If you do not know what you want, the process can become tedious, especially over the phone. You need to know this before you begin.
When you’re trying to cut your grass, don’t cover a unit outside with the clippings. Make sure you shoot the clippings in the other direction from the unit. The same thing should go on when you blow leaves, so take your time when you’re working around HVAC units that are around when you’re blowing debris around.
When spring rolls around, give the condenser fan blades and coils a good clean. Be sure to turn the power off first; you don’t want anything to move. Then, remove the grill, then remove the blades and begin the cleaning process of the blades and the unit.
If the fan on your condenser includes oil ports, they must be lubricated annually. Most of these ports have some sort of protective cap covering them. Choose an oil graded SAE 20, it is non-detergent and lightweight. Place about 10 drops into each of the ports, taking care that it does not overfill.
If the fan on your condenser includes oil ports, they must be lubricated annually. These are usually covered with rubber or metal caps. Put about ten drops or less of a good non-detergent SAE 20 oil into each port.
Find a place that is shaded for your compressor. The cooler the air which goes in, the less work the unit will have to do.
These suggestions should benefit you in taking care of your heating and cooling issues. Failing to keep your system in working order will cause bad things to happen. Luckily, this article should have given you tips to keep your HVAC working properly.
Be sure you have the HVAC unit in your home checked about two times every year. The best times to have the system checked is spring and fall, so you are sure everything is running at peak performance before the heating and cooling seasons. You should have it looked at even if no problems are occurring; there could still be a problem or potential problem.
https://www.greenleafair.com/product-category/trane-systems/
–
–
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/