Before calling someone to repair your system, make sure you know what kind of HVAC system you actually have. Write down what brand your system is along with the model number and, if they’re available, maintenance records. In this way, you can be sure your repair person has all vital information.
Many people don’t even think about their HVAC until there is an issue. Once that happens, fixing the issue quickly is critical. It can be difficult to find a qualified HVAC professional to install a new system or fix the one you have. Here are some suggestions to help you along the way.
Outdoor condenser units need to be cleaned regularly. After a wind or rain storm things may pile up, causing problems with your system. The whole thing can overheat, causing major problems and possibly an enormous expense for you.
Inspect the temps in your home before you call a service to help you with any HVAC issues you’re having. Figure out which rooms are hot and cold. This gives the repairer a starting point to work from.
Make sure that you do not cover your outdoor components with grass clippings when you are trimming the grass. Shoot grass the other way. If you’re blowing leaves, this same problem can occur, so make sure you move around the unit and blow the leaves away from it.
Help the outside condenser fan run efficiently by cleaning the coils and fan blades before the summer starts. If you are doing more than a light surface cleaning, make sure that the power is shut off to the HVAC unit. In addition, be sure to get rid of any leaves or other debris that may have accumulated on the outside condenser.
If there are oil ports on your fan condenser, lubricate it annually. You’ll find these ports are covered with a metal or rubber cap. Choose a SAE 20 oil whch is lightweight and non-detergent and place 10 drops or less into each port, ensuring it doesn’t overfill.
Make sure that you regularly clean debris that might build up on external condenser units. Debris can pile up after a storm, bringing potential damage with it. It can cause the unit to overheat and break down.
When choosing the area for placing an outdoor compressor device, place it in a shady area. Your unit won’t have to work as hard to cool the inside air if the outside air it sucks from is cooler.
When you’re trying to cut your grass, don’t cover a unit outside with the clippings. Make sure the grass does not get in your unit. This also applies when you blow leaves, so be very careful near your exterior HVAC units when you move debris.
Place your HVAC unit in the shade to boost efficiency. It will reduce the temperature of the air going into the unit, meaning that it will not have to work as hard to cool it.
In order to boost efficiency, place new outdoor units or move your current unit to a place which resides in the shade. You save money this way because the air conditioner is now pulling in cooler air, which is easier to cool further.
Consumers are usually advised to have their HVAC systems inspected twice a year. The best times to have the system checked is spring and fall, so you are sure everything is running at peak performance before the heating and cooling seasons. It doesn’t matter if your unit seems to be properly working, it is still advisable that you perform maintenance and resolve any potential problems.
Since reading this piece, you have a better education on HVAC systems. These suggestions should help you in understanding your unit and how to repair or replace it. Refer back to this article as necessary to make sure that you’re on the right track.
Turn off your outdoor condenser when it becomes cold out. If the temperature drops to under 60 degrees, you risk damage to the unit if you leave it on. You will save in repair bills and increase the efficiency of your system.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/