If your HVAC system is acting up, take a tour of the house prior to calling a professional. Make a list of the rooms which are comfortable and which just aren’t. If you do this, it will be a great help to the future contractor, who will now be able to quickly locate the problem issue.
HVAC information has been sweeping the nation as more and more people are becoming interested in performing the maintenance and repairs themselves. However, it’s still a complicated subject. You do not have to though. Use the guide below to learn more.
To make sure your condenser fan works properly, keep the fan blades and the coils clean. Turn off the power if you are going to work on your HVAC system. Also, it is important to clear the outside condenser unit from any debris that maybe trapped inside.
Know what work you want done before you select an HVAC contractor. Providing you with an accurate estimate over the telephone may be difficult to impossible is they can’t see the system you have. It will be way more hard if you can’t figure out what they need to do. Know this stuff ahead of time.
Clean the condenser on your debris regularly. Debris quickly gathers here, even more so if there is a storm. This can cause major issues with your system. It can also cause it to overheat.
Every spring you should clean the coils and fan blades on your condenser fan. Before you do anything, however, turn the power off. Then you need to get the grill popped off and get the blades out so you can clean them and your unit gently.
Clean your condenser’s fan blades and coil in the spring. First, the power should be turned off so things don’t move as you work. Then remove the grill, remove the blades and clean it from top to bottom gently.
Your HVAC unit may suffer when trees start to lose their leaves. When you see nearby trees shedding their leaves, clean the fan grill on your unit constantly. Otherwise, the unit will have to work unnecessarily hard.
When you mow your lawn, take care that you don’t get grass clippings all over your outdoor unit. Get the grass shot away from your unit. The same should happen if you are blowing leaves, so be especially careful when you are going by your exterior HVAC devices whenever you are moving debris.
If your condenser comes with oil ports, you should lubricate it yearly. Most of these ports have some sort of protective cap covering them. Use SAE 20 oil that is lightweight and detergent free, and put ten drops or fewer into each one. Make sure not to overfill them.
As the trees around your home lose leaves, it can cause your HVAC unit trouble. When you notice your trees shedding, frequently clean your unit’s fan grill. The fan must not have anything in the way so that air can flow into it, and if it is clogged, you’ll have a lot of headaches eventually.
When selecting a location for an outdoor compressor, opt for a shady area, if possible. If your unit is sucking in cooler air, it will have less work to do to cool that air as it sends it inside which boosts efficiency.
When selecting the spot to put the outdoor compressor for your unit, choose somewhere that gets plenty of shade. If you have a unit taking in air that’s cooler, it won’t have to work so hard to cool air that it sends to your home.
With the right tools and advice, working with your HVAC system isn’t incredibly hard. It’s hard to learn without advice like that above, so remember that. Start now, and you can’t go wrong.
A good way to save money with your air conditioning is by installing a programmable thermostat. A thermostat that’s programmable is going to save you around ten percent on the heating and cooling costs you have to pay when you turn it back about fifteen percent for a part of the day. This will save you a lot of money during the year.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/