Before calling for help, know the system you have. Look for the model and brand number. The contractor will likely need all of this information.
Learning about your HVAC system is part of being a home owner. If you want to learn a little more about something like this, then this article is going to help you out. Just continue reading and by the time you’re through, you’ll know something about HVAC systems that you didn’t know when you began!
If your HVAC doesn’t seem to be working properly, check things out yourself prior to calling in a technician. Figure out which rooms are too cool or warm. That will help your repairman figure out where the problem is, and how he can fix it easily and quickly.
Before making that repair phone call, make sure you know the specifics about your particular system. It is important to understand what model it is and which brand it is. Also, if it has been serviced before, you should have that information handy. This information will be helpful to any contractor you hire to repair it.
Know what you need before you hire a contractor. It will be hard for a contractor to give you a price estimate over the phone if they have not seen your current system. They also won’t be able to offer you a quote if they don’t have a detailed idea of what you want done. Understand this information beforehand.
Before contacting a repair service, do a short tour of the entire home. Know what part of the house is cold and which is hot. This gives the repairer a starting point to work from.
Before the summer you should clean out your condenser fan’s blades and coils. If you are doing more than a light surface cleaning, make sure that the power is shut off to the HVAC unit. Remove leaves and debris from the condenser outside.
Before you choose an HVAC contractor, have an idea in your mind of what needs to be done. Providing you with an accurate estimate over the telephone may be difficult to impossible is they can’t see the system you have. If you can’t explain changes you’ve made, the process will be even more difficult. It’s important to know this beforehand.
Don’t let grass clippings pile up against your outdoor condenser. When you work with your lawn mower, make sure it spits the grass to the side opposite of your unit. Do the same when blowing snow or leaves.
Each spring, clean the fan blades and coils on your condenser. Start by turning off the power to avoid having anything move when you work on it. After you have turned the power off, you simply remove the grill and the blades to perform a gentle cleansing.
Leaves and debris can damage your system. At least twice a week, you need to clean the grill of your fan. The fan needs unobstructed air flow, and if debris is blocking this air flow, then your system could suffer.
When you cut the grass, make sure your mower isn’t tossing clippings toward your outdoor units. Make sure you shoot the clippings in the other direction from the unit. Be just as mindful when you blow leaves to not blow them toward your HVAC equipment.
If you have oil ports as part of the fan condenser, annual lubrication is key. They are usually fitted with a rubber or metal cap. Pick a type of SAE 20 oil that is non-detergent and lightweight. Place 10 or less drops into every port to avoid overfilling.
With the right information, an HVAC unit is something anyone can work with. Be sure you pay close attention to everything as you learn. Now put the guidelines you learned from this article to work.
A good place to place your compressor unit outside is in a shady spot. When the unit sucks in cooler air, then less work is required to cool it further which in turn boosts the units efficiency.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/