Prior to putting in a service call on your HVAC, be able to identify it. Take a look at the system or the owner’s manual to find the name and model number. This will facilitate the process when your contractor asks for this information.
Needing service on an HVAC system during cold or hot days is a serious frustration. Learning about your HVAC system will help you choose the right person to repair it. Read on to find out more about the topic right now.
If your HVAC doesn’t seem to be working properly, check things out yourself prior to calling in a technician. Know what part of the house is cold and which is hot. Doing so can help your technician fix your HVAC issue quickly.
Prior to putting in a service call on your HVAC, be able to identify it. Write down the make, model, and any maintenance history. This will help you give the new contractor the necessary information.
Clean the condenser coils and fan at the beginning of the year to help the unit run efficiently. Turn off your power before doing any job like this. If you see debris, get rid of it.
Know what work you want done before you select an HVAC contractor. This will make the quote process much easier. Getting an estimate will be even more difficult if you cannot adequately describe the problem. Be sure to find this out ahead of time.
If your unit is outdoors, clean them regularly. Debris quickly gathers here, even more so if there is a storm. This can cause major issues with your system. It can also cause it to overheat.
Clean your fan blades and coils each spring to ensure that your condenser fan operates at it’s best. If you are doing more than a light surface cleaning, make sure that the power is shut off to the HVAC unit. Remove leaves and debris from the condenser outside.
Lubricate the oil ports on your condenser once each year. You’ll find these ports are covered with a metal or rubber cap. Put about ten drops or less of a good non-detergent SAE 20 oil into each port.
Every spring you should clean the coils and fan blades on your condenser fan. Before you do anything, however, turn the power off. Remove the grill and the blades, and then you can give them all a gentle clean.
Try to choose a shady place to locate the outdoor compressor device. The cooler the air that the unit is able to access, the less work it has to perform.
Fall is a hard time on HVAC units. Make certain you are cleaning the fan grill often if trees nearby have leaves that are falling. The fan needs to be able to get proper air inside without any blockages, and extra blockage can later develop into more serious problems.
To increase the efficiency of your HVAC unit, be sure to keep it in the shade. This will help ensure that the AC is pulling in cooler air, reducing the amount of work it has to do and saving you money.
Have your HVAC serviced at least yearly. The best time of year to have the system checked is right before the weather begins to change. Even if nothing seems wrong, checking it out can help you find and fix potential issues.
It is very important that your HVAC system is serviced two times a year. Ideally, you should have it looked at in the spring and fall so you know everything is set for the hot and cold months. Even though it may seem as nothing is wrong with the unit, a simple inspection can prove otherwise.
Hiring a contractor is a daunting task if you don’t know much about the field. It doesn’t need to be that tough. Hopefully, you now have the information you need to work with your HVAC system.
Once it grows cold outside, turn off your outside condenser unit. To avoid damage, units should be turned off when temperatures are below 60 degrees. This can keep your HVAC running and can save you money on repairs.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/