Before making that repair phone call, make sure you know the specifics about your particular system. Write down what brand your system is along with the model number and, if they’re available, maintenance records. This makes sure your contractor will be sufficiently prepared.
If you need to buy an HVAC system, you may be confused by the many choices. What system should you get? What size should you purchase? What features will you want? It can be hard to figure out what you need. Use the tips below for advice on picking the right system.
Before an HVAC expert comes to your home to do any repair work, walk around the home and check out the temps in every room. Figure out which rooms feel hot and which feel cold. This can help the contractor determine the problem areas quickly and fix the problem easily.
Get all of the details regarding a broken system before calling for repair. Get the brand, model name, and if you can you should get the maintenance history out. This helps make sure the contractor has the information they will need.
Know what work you want done before you select an HVAC contractor. A contractor will not be able to give you an accurate price without accurate information about your system. If you are unable to explain the work that needs to be taken care of, the conversation will be even less fruitful. Understand this information beforehand.
If your HVAC system is acting up, take a tour of the house prior to calling a professional. Know what part of the house is cold and which is hot. The contractor can probably figure out and fix the problem easier.
Cleaning the blades and coils will help the system run better. Before you do clean the coils and fan blades, always take the precaution of turning off all power to the unit. Take away all of the debris as well.
Clean the debris off your outdoor condenser unit. Particularly after bad weather, you should inspect your unit. It can overheat, leading to disaster within your system.
Each spring it’s time to clean the inside of your condenser unit, including the fan and the sensitive coil. Before you begin cleaning the unit, make sure that it is unplugged. Next, pop off the grill, pull out the blades and start cleaning them and the unit itself off gently.
Each spring, clean the fan blades and coils on your condenser. First, turn off the power so that nothing will move as you are working on it. Then, take off the grill and get the blades out. Clean everything with care.
If your condenser comes with oil ports, you should lubricate it yearly. These ports are typically covered with caps made of metal or rubber. Use a lightweight oil and do not overfill them.
Do not allow grass clippings to cover the outdoor unit of your HVAC system. Aim your grass cuttings in a direction away from your unit. If you’re blowing leaves, this same problem can occur, so make sure you move around the unit and blow the leaves away from it.
You can boost the efficiency of your HVAC unit by replacing it with a new energy efficient one or moving your old one to a shady outside location. The air in the shade is cooler and can help save on energy costs.
It can be overwhelming to find a HVAC system. That decision just became a little bit easier though, now that you have the advice of experts in hand. If you’ve got the time, review the tips above one more time for sake of clarity. Use the tips to make a more informed decision when it counts.
Turn off outdoor condenser units when weather turns cold. If it’s less than 60 degrees outside, turn the unit off. This will maximize the life of your unit.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/