Check out the system that you have before you call a professional. Look for the model and brand number. This helps make sure the contractor has the information they will need.
It is not an option to let your HVAC system fail. By following some simple steps for maintenance and care, you can likely add life to your HVAC system. The article below has many solid tips just for you!
Understand what you want before talking to a contractor. They won’t be able to offer you a quote if they haven’t seen your system. It will be even harder if you cannot explain what you have done. So, figure out this information before anything else.
When you start making calls to get someone to help with your HVAC system, it’s a good idea to know what system you have before that phone call. Find out the brand and model and, if possible, dig out the maintenance history. This helps make sure the contractor has the information they will need.
To make sure your condenser fan works properly, keep the fan blades and the coils clean. Except when you do superficial cleaning, you need to always make sure the power is off on the unit. Clean the outdoor condenser as well.
Before you hire an HVAC contractor, have some sort of idea of the work that needs to be done. This will make the quote process much easier. If you are unable to explain the work that needs to be taken care of, the conversation will be even less fruitful. Know the right information ahead of time.
Be careful when doing yard work that you do not get debris on or in your unit. Instead, make sure that the grass is shooting in the opposite direction. This also applies to blowing leaves or moving debris. Just be careful with that exterior HVAC unit.
Clean the debris off your outdoor condenser unit. Debris can pile up at rates that increase during rainy or windy weather, and this can foul up the inner workings of your system. Left unchecked, your unit is more likely to break down.
Many homeowners forget to oil their condenser at least once per year, but it is required. These ports are often covered by a rubber or metal cap. Put about ten drops or less of a good non-detergent SAE 20 oil into each port.
Every spring you should clean the coils and fan blades on your condenser fan. Don’t forget to disconnect the power first. Then, pop off its grills, pull the blades out, and begin cleaning the unit and them gently.
Put your outdoor unit in places with shade. It will help you save on your energy bill when you do this.
Fall is a hard time on HVAC units. Make sure the unit’s fan grill is cleaned frequently when the leaves begin to fall. The fan must be unobstructed to work properly, and if it becomes blocked, it could cause your system to break down.
Have the HVAC system checked twice a year at the least. The best times to have the system checked is spring and fall, so you are sure everything is running at peak performance before the heating and cooling seasons. Regular inspection will help you avoid unexpected repairs.
When the weather starts to cool down, make sure you turn off outdoor condenser units. If the outside temp is under 60 degrees, turn the unit off to prevent damage. This will help keep your HVAC system in good health for years, which means you will save on repair bills.
As you’ve read, you should care for your HVAC system so that it does not go bad. It can be quite costly to fix a failed HVAC system. You can help prevent overspending by knowing who to hire, what to look for in a unit and what size unit to choose.
Look for calculators online to help you determine the size of unit you need for your home. If you make the mistake of purchasing a unit that is too large, it will not cool efficiently. Use the manual to determine what size is right for you.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/