Before contacting a repair service, do a short tour of the entire home. Pay attention to which areas of the house are warm and which ones are cool. You can then relay this information to the technician so that they can more easily figure out what the problem is.
Not many people look forward to a malfunctioning heater or air conditioner. A temperature controlled home is a comfortable home, and you should make yourself aware of what you need to know to keep it cared for. The following tips can help you, so read on!
Before you hire an HVAC contractor, have some sort of idea of the work that needs to be done. Providing you with an accurate estimate over the telephone may be difficult to impossible is they can’t see the system you have. Being unable to explain what has been already done will make it even harder. This is information that you should have prepared in advance.
If you have some problems with the HVAC system, check out your home before calling a contractor. Figure out which rooms are too cool or warm. This can help the contractor determine the problem areas quickly and fix the problem easily.
If you have condenser units outside your home, be sure to clean out the debris from them often. After a wind or rain storm things may pile up, causing problems with your system. Overheating could occur, which will be problematic.
Clean your fan and coils when the weather begins to warm. Always make sure you shut off the power before you do any work on the unit other than superficial cleaning. Also, make sure you remove any debris or leaves from the condenser unit outside.
Each spring, clean the fan blades and coils on your condenser. Shut the power off before you do anything. Then, remove the grill, then remove the blades and begin the cleaning process of the blades and the unit.
Regularly remove debris from outside condenser units. Things tend to pile up around these units, especially after storms come through, which could cause problems to your system. It will damage the system by overheating.
If you have oil ports as part of the fan condenser, annual lubrication is key. These ports are typically covered with caps made of metal or rubber. Put 10 drops of lightweight, non-detergent SAE oil in each port. Be careful not to use too much.
Every spring you need to make sure your condenser fan’s coils and blades on the fan part are clean. First, make sure the power is off to ensure nothing moves while you are working. Take the grill off and pull the blades out to clean them.
It’s a good idea to put your outdoor compressor in a shady area. The unit will operate more efficiently to cool your home if the intake air is cooler to begin with.
Be careful when doing yard work that you do not get debris on or in your unit. Shoot the grass away from the unit. The same goes for when you blow leaves, so make sure your are careful when moving any debris in the vicinity of your HVAC devices.
Get your HVAC unit serviced two times per year. This should be done in the fall and again in the spring. Regular inspection will help you avoid unexpected repairs.
To keep your HVAC system running as long as possible and smoothly, you’ll want to remember the advice shared here. It is a bad feeling to return home to find that the vents have no air coming from them. Thinking about the repair costs makes things even worse. But, by using these tips, you can avoid this type of situation. Keep these tips handy at all times so that you can tackle any HVAC issue.
Turn off your outdoor condenser when it becomes cold out. To avoid damage, units should be turned off when temperatures are below 60 degrees. This will allow your system to work well every year, and that saves you quite a bit on making repairs.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/