If you’ve been having trouble with an HVAC system, look around your home before calling in people to help. Figure out which rooms are too cool or warm. The contractor can probably figure out and fix the problem easier.
It’s not so difficult to get into HVAC if you know what you’re doing. However, with a little work, you can become an expert of sorts. Look at this article if you are interested.
Before you hire an HVAC contractor, have some sort of idea of the work that needs to be done. It’s hard for these contractors to give phone estimates without seeing the current system you have. It will be even harder if you cannot explain what you have done. Understand this information beforehand.
If you struggle with your HVAC, try touring your home before calling a professional. Make note of which rooms are cold and which are hot. This will allow a contractor to quickly figure out what the issue is and how it can be fixed fast.
Don’t get grass clippings on your outside unit. When you work with your lawn mower, make sure it spits the grass to the side opposite of your unit. This also applies to leaf blowing and any other yard work that results in debris.
Clean the fan blades and coils prior to summertime. Be safe and turn off the power supply before working on your HVAC unit. In addition, always remove all debris such as leaves from the outside condenser unit.
If you have oil ports as part of the fan condenser, annual lubrication is key. These ports are typically covered with caps made of metal or rubber. Pick a type of SAE 20 oil that is non-detergent and lightweight. Place 10 or less drops into every port to avoid overfilling.
Clean the coils on the condenser fan from time to time. Don’t forget to disconnect the power first. Then you need to get the grill popped off and get the blades out so you can clean them and your unit gently.
If you can choose the place where your outdoor compressor goes, pick a spot with lots of shade. When your unit is bringing in cool air, it will not have to work as hard to cool the air as it moves it inside, boosting efficiency.
Make sure clippings don’t get on your outdoor units when your mowing your lawn. Have the grass shoot in the opposite direction. If you’re blowing leaves, this same problem can occur, so make sure you move around the unit and blow the leaves away from it.
Turn off any outdoor condensers you have when the weather gets cold. If the outside temp is under 60 degrees, turn the unit off to prevent damage. This will allow your system to work well every year, and that saves you quite a bit on making repairs.
During the fall, leaves can gather around your HVAC. Clean outdoor units often to remove leaves. The fan needs to be able to get proper air inside without any blockages, and extra blockage can later develop into more serious problems.
If you can, use double-paned windows instead of single-paned ones. Double pane windows help minimize your air conditioning use in the summer by keeping the cooler air inside your home. This also helps keep it warm in the winter.
If there are oil ports on your fan condenser, lubricate it annually. A rubber or metal cap is typically placed over such ports. Choose a SAE 20 oil whch is lightweight and non-detergent and place 10 drops or less into each port, ensuring it doesn’t overfill.
Install a programmable thermostat to save energy costs. It changes the temperature so the system isn’t in use when it’s cooler outside or no one is home. Take advantage of the convenience of the ability to control many programable thermostats from your favorite electronic device.
With the right knowledge, anyone can learn about HVAC systems. Move slow and take your time learning through experience and research. Use these guidelines to make it work.
Make sure to have your unit serviced once a year. During service the technician will check the motor and refill the system fluids. This ensures your system runs smoothly.
Micro Clean Air Duct Cleaning https://www.microcleandfw.com/